Lamination Machine For PP Woven Bag-800mm

Short Description:

This unit uses PP or PE as the raw material, and uses the salivation process and PP Woven Fabric to perform Single Side/Double Side Lamination. The entire process flow of the unit, from Fabric Under, Lamination, and Rewider, is equipped with advanced electrical and mechanical devices to achieve single control and group control linkage.


Product Detail

Product Tags

Introduction

This unit uses PP or PE as the raw material, and uses the salivation process and PP Woven Fabric to perform Single Side/Double Side Lamination. The entire process flow of the unit, from Fabric Under, Lamination, and Rewider, is equipped with advanced electrical and mechanical devices to achieve single control and group control linkage. The Two Section Player uses EPC Control to perform EPC control on the fabric, and uses brakes to perform Tension Control on the fabric to achieve Automatic Roller; Before laminating, a preheating roller is installed to preheat and dry the fabric. Lamination, silica gel, pressing roller, etc. adopt a double interlayer forced water cooling circulation structure, which has a good cooling effect; Rewider adopts two section stable tension surface friction Rewider and pneumatic cross cutting to achieve non-stop Roller Change. It is equipped with a waste edge cutting, edge blowing mechanism, and product length counting device. The clutch of each roller of the entire machine is controlled pneumatically.

Specifications/Technical parameters/Technical Data

Width of Lamination

300-650mm

Thickness of Lamination

6-60um

Speed

20-200 m/min

Screw diameter × Length-diameter ratio

Φ75*33mm

Roll length

800mm

Roll Speed /Min

80rpm

Max Extrusion

230(115*2)kg

Length of T-shaped Die Mouth

950mm

Max Unwider Diameter

1300mm

Max Rewider Diameter

1300mm

Power Rate

120kw

Air Consumption

0.6m³/min

Cooling Water

0.5³/min

Weight

26Ton

Measurement

16*55*2.5m

Product Details

1) The adhesive shall be firm without obvious peeling. When the coating uses the same type of fabric as PP Woven Fabric, the adhesive peel resistance shall not be less than 3N/30mm.

2) The entire width of the fabric shall be fully coated without obvious horizontal lines or holidays, and the width of the coating side shall not be greater than 5mm.

3) Laminated layers have uniform thickness and consistent color, without bubbles, black spots, streaks, and hard lumps.

4) Rewider is neat, with a deviation of ± 5mm, and consistent tightness.

The fabric surface is clean and free from impurities.

8

Feature

After more than 20 years of production practice, this Lamination machine has continuously improved and innovated its models, featuring advanced technology, stable quality, convenient operation, and high degree of automation. It is widely used in the packaging, storage, and transportation of chemical, petrochemical, cement, metallurgy, and mineral industries.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories